Buy ResMed CPAP AirSense 10 Elite with 25% Off at Medizone

FEATURES

Connectivity comes standard
Advanced event detection
AutoRamp™ with sleep onset detection delivers low pressure to help patients fall asleep with ease. Once the patient is asleep, it comfortably ramps up the pressure to the prescribed level.
The quiet Easy-Breathe motor makes for a peaceful environment for the patient and their bed partner.
Expiratory pressure relief (EPR™) maintains the optimal treatment for the patient during inhalation and reduces pressure during exhalation.
SmartStart™ allows the patient to start therapy by breathing in, instead of pressing the 'Start' button.
Pulse oximetry monitoring is available.
Integrated humidification simplifies setting up the device and makes therapy easier for your patients.
Using AirView™, you can access nightly therapy data, troubleshoot remotely (using the remote assist feature) and change device settings remotely.
The user-friendly controls, intuitive interface and color LCD screen make it simple to navigate menus and customize comfort settings.
The built-in ambient light sensor adjusts the brightness of the screen based on the light in the room and turns off automatically.

PRODUCT SPECIFICATIONS

Height - 116 mm
Weight - 1248 gm
Breadth - 255 mm
Length - 150 mm
Pressure Measure Tolerance - ±[0.5 cm H20 (0.5 hPa) + 4% of measured value]
Flow Measure Tolerance - ±6 L/min or 10% of reading, whichever is greater, at 0 to 150 L/min positive flow
Peak Power Consumption - 104W (108VA)
Operating Pressure Range - 4 to 20 cm H2O
Supplement Oxygen Maximum Flow -4 L/min
Power Supply Unit - 90W power supply unit
Storage and Transport Humidity -5 to 95% relative humidity, non-condensing
Storage and Transport Temperature - -4°F to +140°F (-20°C to +60°C)
Operating Humidify - 10 to 95% relative humidity, non-condensing
Housing Construction - Flame retardant engineering thermoplastic
Water Capacity - To maximum fill line 380 mL
Air Outlet - 22 mm (complies with ISO 5356-1:2004)
Typical Power Consumption - 53W (57VA)
Sensors - Pressure sensor: Internally located at device outlet, analog gauge pressure type, -5 to +45 cm H2O (-5 to +45 hPa) Flow sensor: Internally located at device inlet, digital mass flow type, -70 to +180 L/min
Operating Altitude - Sea level to 8,500' (2,591 m); air pressure range 1013 hPa to 738 hPa
Operating Temperature - +41°F to +95°F (+5°C to +35°C)
Maximum Single Fault Steady State Pressure - The device will shut down in the presence of a single fault if the steady-state pressure exceeds: 30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec
Modes - CPAP

CONTENT OF BOX

Warranty: 1 Year

Ratings & Reviews

Write a Review